BHP+14 hp (8%)
Standard
166 hp
Tuned
180 hp
Torque+20 Nm (9%)
Standard
220 Nm
Tuned
240 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowHonda CR-V 2.4 i-VTEC 166hp ECU Remapping
Considering an ECU remap for your Honda CR-V 2.4 i-VTEC 166hp? A Stage 1 remap can take this 2007 - 2012 petrol engine from 166 BHP to 180 BHP and from 220 Nm to 240 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Honda CR-V can achieve.
How this engine compares
- 15thof 16 Honda CR-V engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Honda CR-V 2.4 i-VTEC 166hp is a 2.4L naturally aspirated petrol engine producing 166 BHP and 220 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 240 Nm — a gain of around 14 BHP (8%) and 20 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other CR-V 2007 - 2012 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|