BHP+30 hp (17%)
Standard
180 hp
Tuned
210 hp
Torque+60 Nm (16%)
Standard
380 Nm
Tuned
440 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumHonda Accord 2.2 i-DTEC 180hp ECU Remapping
Considering an ECU remap for your Honda Accord 2.2 i-DTEC 180hp? A Stage 1 remap can take this All diesel engine from 180 BHP to 210 BHP and from 380 Nm to 440 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Honda Accord can achieve.
How this engine compares
- 3rdof 6 Honda Accord engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Honda Accord 2.2 i-DTEC 180hp is a 2.2L turbocharged diesel engine producing 180 BHP and 380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 210 BHP and 440 Nm — a gain of around 30 BHP (17%) and 60 Nm (16%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Accord All Engines
| Engine | BHP | Gain | Torque |
|---|