BHP+30 hp (18%)
Standard
165 hp
Tuned
195 hp
Torque+60 Nm (26%)
Standard
230 Nm
Tuned
290 Nm
Suitability
Moderate (5.5/10)Gains Profile
Torque-focusedHeadroom
HighHolden Captiva 2.4L 165hp ECU Remapping
Considering an ECU remap for your Holden Captiva 2.4L 165hp? A Stage 1 remap can take this 2013 -> petrol engine from 165 BHP to 195 BHP and from 230 Nm to 290 Nm of torque (naturally aspirated). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Holden Captiva can achieve.
How this engine compares
- 3rdof 5 Holden Captiva engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Holden Captiva 2.4L 165hp is a 2.4L naturally aspirated petrol engine producing 165 BHP and 230 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 195 BHP and 290 Nm — a gain of around 30 BHP (18%) and 60 Nm (26%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.
!