BHP+25 hp (19%)
Standard
135 hp
Tuned
160 hp
Torque+57 Nm (30%)
Standard
188 Nm
Tuned
245 Nm
Suitability
Good (7.5/10)Gains Profile
Torque-focusedHeadroom
HighGWM V80 1.5 Turbo 135hp ECU Remapping
Considering an ECU remap for your GWM V80 1.5 Turbo 135hp? A Stage 1 remap can take this 2008 - > petrol engine from 135 BHP to 160 BHP and from 188 Nm to 245 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your GWM V80 can achieve.
How this engine compares
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 40%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The GWM V80 1.5 Turbo 135hp is a 1.5L turbocharged unknown fuel type engine producing 135 BHP and 188 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 245 Nm — a gain of around 25 BHP (19%) and 57 Nm (30%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Technical Specifications
- Fuel Type
- Petrol
- Aspiration
- Turbocharged
- Displacement
- 1.5L