BHP+20 hp (7%)
Standard
275 hp
Tuned
295 hp
Torque+29 Nm (12%)
Standard
251 Nm
Tuned
280 Nm
Suitability
Moderate (4/10)Gains Profile
Torque-focusedHeadroom
LowGMC Acadia 3.6 V6 275hp ECU Remapping
Considering an ECU remap for your GMC Acadia 3.6 V6 275hp? A Stage 1 remap can take this 2007 - 2013 petrol engine from 275 BHP to 295 BHP and from 251 Nm to 280 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your GMC Acadia can achieve.
How this engine compares
- 2ndof 3 GMC Acadia engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The GMC Acadia 3.6 V6 275hp is a 3.6L naturally aspirated petrol engine producing 275 BHP and 251 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 295 BHP and 280 Nm — a gain of around 20 BHP (7%) and 29 Nm (12%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Acadia 2007 - 2013 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|