BHP+30 hp (19%)
Standard
160 hp
Tuned
190 hp
Torque+70 Nm (29%)
Standard
240 Nm
Tuned
310 Nm
Suitability
Good (7.5/10)Gains Profile
Torque-focusedHeadroom
HighFord S-Max 1.6 EcoBoost 160hp ECU Remapping
Considering an ECU remap for your Ford S-Max 1.6 EcoBoost 160hp? A Stage 1 remap can take this 2010 - 2015 petrol engine from 160 BHP to 190 BHP and from 240 Nm to 310 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford S-Max can achieve.
How this engine compares
- 11thof 23 Ford S-Max engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford S-Max 1.6 EcoBoost 160hp is a 1.6L turbocharged petrol engine producing 160 BHP and 240 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 310 Nm — a gain of around 30 BHP (19%) and 70 Nm (29%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.