BHP+19 hp (5%)
Standard
411 hp
Tuned
430 hp
Torque+22 Nm (4%)
Standard
588 Nm
Tuned
610 Nm
Suitability
Limited (3/10)Gains Profile
Limited headroomHeadroom
LowFord Raptor 6.2 V8 411hp ECU Remapping
Considering an ECU remap for your Ford Raptor 6.2 V8 411hp? A Stage 1 remap can take this 2010 - 2018 petrol engine from 411 BHP to 430 BHP and from 588 Nm to 610 Nm of torque (naturally aspirated). This engine scores 3/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Raptor can achieve.
How this engine compares
- 4thof 4 Ford Raptor engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 12%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Raptor 6.2 V8 411hp is a 6.2L naturally aspirated petrol engine producing 411 BHP and 588 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 430 BHP and 610 Nm — a gain of around 19 BHP (5%) and 22 Nm (4%).
This engine has low remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other Raptor 2010 - 2018 Engines
| Engine |
|---|