BHP+20 hp (12%)
Standard
170 hp
Tuned
190 hp
Torque+20 Nm (5%)
Standard
420 Nm
Tuned
440 Nm
Suitability
Moderate (5.5/10)Gains Profile
Power-focusedHeadroom
LowFord Ranger 2.0 Ecoblue 170hp ECU Remapping
Considering an ECU remap for your Ford Ranger 2.0 Ecoblue 170hp? A Stage 1 remap can take this 2019 - 2023 diesel engine from 170 BHP to 190 BHP and from 420 Nm to 440 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Ranger can achieve.
How this engine compares
- 18thof 21 Ford Ranger engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Ranger 2.0 Ecoblue 170hp is a 2.0L turbocharged diesel engine producing 170 BHP and 420 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 440 Nm — a gain of around 20 BHP (12%) and 20 Nm (5%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Ranger 2019 - 2023 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|