Ford Puma 1.0 Ecoboost ST Powershift 170hp Remap
Expected gains of +10 BHP and +27 Nm torque
Get Your Free Quote ↓BHP+10 hp (6%)
Standard
170 hp
Tuned
180 hp
Torque+27 Nm (11%)
Standard
248 Nm
Tuned
275 Nm
Suitability
Good (6/10)Gains Profile
Torque-focusedHeadroom
LowFord Puma 1.0 Ecoboost ST Powershift 170hp ECU Remapping
Considering an ECU remap for your Ford Puma 1.0 Ecoboost ST Powershift 170hp? A Stage 1 remap can take this 2019 -> petrol mhev engine from 170 BHP to 180 BHP and from 248 Nm to 275 Nm of torque (turbocharged). This engine scores 6/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Puma can achieve.
How this engine compares
- 4thof 5 Ford Puma engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 16%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Puma 1.0 Ecoboost ST Powershift 170hp is a 1.0L turbocharged petrol mhev engine producing 170 BHP and 248 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 275 Nm — a gain of around 10 BHP (6%) and 27 Nm (11%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Puma 2019 -> Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.5 Ecoblue 120hp | 120 → 150 | +30 | 300 → 340 |