BHP+20 hp (10%)
Standard
205 hp
Tuned
225 hp
Torque+21 Nm (7%)
Standard
319 Nm
Tuned
340 Nm
Suitability
Moderate (4/10)Gains Profile
Power-focusedHeadroom
LowFord Mustang 4.0 V6 205hp ECU Remapping
Considering an ECU remap for your Ford Mustang 4.0 V6 205hp? A Stage 1 remap can take this -> 2014 petrol engine from 205 BHP to 225 BHP and from 319 Nm to 340 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Mustang can achieve.
How this engine compares
- 7thof 15 Ford Mustang engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 12%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Mustang 4.0 V6 205hp is a 4.0L naturally aspirated petrol engine producing 205 BHP and 319 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 225 BHP and 340 Nm — a gain of around 20 BHP (10%) and 21 Nm (7%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Mustang -> 2014 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|