BHP+19 hp (8%)
Standard
226 hp
Tuned
245 hp
Torque+25 Nm (9%)
Standard
285 Nm
Tuned
310 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowFord Mondeo 220 ST 226hp ECU Remapping
Considering an ECU remap for your Ford Mondeo 220 ST 226hp? A Stage 1 remap can take this 2000 - 2007 petrol engine from 226 BHP to 245 BHP and from 285 Nm to 310 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Mondeo can achieve.
How this engine compares
- 39thof 45 Ford Mondeo engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 14%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Mondeo 220 ST 226hp is a 3.0L naturally aspirated petrol engine producing 226 BHP and 285 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 245 BHP and 310 Nm — a gain of around 19 BHP (8%) and 25 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Mondeo 2000 - 2007 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|