BHP+30 hp (13%)
Standard
240 hp
Tuned
270 hp
Torque+34 Nm (9%)
Standard
366 Nm
Tuned
400 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumFord Fusion 2.0 Turbo 240hp ECU Remapping
Considering an ECU remap for your Ford Fusion 2.0 Turbo 240hp? A Stage 1 remap can take this 2013 -> petrol engine from 240 BHP to 270 BHP and from 366 Nm to 400 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Fusion can achieve.
How this engine compares
- 2ndof 6 Ford Fusion engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 19%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Fusion 2.0 Turbo 240hp is a 2.0L turbocharged petrol engine producing 240 BHP and 366 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 270 BHP and 400 Nm — a gain of around 30 BHP (12%) and 34 Nm (9%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other Fusion 2013 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|