BHP+8 hp (10%)
Standard
80 hp
Tuned
88 hp
Torque+12 Nm (10%)
Standard
124 Nm
Tuned
136 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowFord Fusion 1.4i 16v 80hp ECU Remapping
Considering an ECU remap for your Ford Fusion 1.4i 16v 80hp? A Stage 1 remap can take this 2002 - 2012 petrol engine from 80 BHP to 88 BHP and from 124 Nm to 136 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Fusion can achieve.
How this engine compares
- 6thof 6 Ford Fusion engines by power gain
- 1%of the 9,842 engines we hold gain data for see a smaller power increase
- 1%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Fusion 1.4i 16v 80hp is a 1.4L naturally aspirated petrol engine producing 80 BHP and 124 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 88 BHP and 136 Nm — a gain of around 8 BHP (10%) and 12 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Fusion 2002 - 2012 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|