Ford Fusion (USA) 2.5 Duratec 175hp Remap
Expected gains of +10 BHP and +15 Nm torque
Get Your Free Quote ↓BHP+10 hp (6%)
Standard
175 hp
Tuned
185 hp
Torque+15 Nm (7%)
Standard
230 Nm
Tuned
245 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowFord Fusion (USA) 2.5 Duratec 175hp ECU Remapping
Considering an ECU remap for your Ford Fusion (USA) 2.5 Duratec 175hp? A Stage 1 remap can take this 2013 -> petrol engine from 175 BHP to 185 BHP and from 230 Nm to 245 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Fusion (USA) can achieve.
How this engine compares
- 6thof 6 Ford Fusion (USA) engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 3%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Fusion (USA) 2.5 Duratec 175hp is a 2.5L naturally aspirated petrol engine producing 175 BHP and 230 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 185 BHP and 245 Nm — a gain of around 10 BHP (6%) and 15 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Fusion (USA) 2013 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|