BHP+30 hp (13%)
Standard
225 hp
Tuned
255 hp
Torque+80 Nm (25%)
Standard
320 Nm
Tuned
400 Nm
Suitability
Good (7/10)Gains Profile
Torque-focusedHeadroom
MediumFord Focus 2.5 Turbo ST 225hp ECU Remapping
Considering an ECU remap for your Ford Focus 2.5 Turbo ST 225hp? A Stage 1 remap can take this 2004 - 2010 petrol engine from 225 BHP to 255 BHP and from 320 Nm to 400 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Focus can achieve.
How this engine compares
- 21stof 61 Ford Focus engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Focus 2.5 Turbo ST 225hp is a 2.5L turbocharged petrol engine producing 225 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 255 BHP and 400 Nm — a gain of around 30 BHP (13%) and 80 Nm (25%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other Focus 2004 - 2010 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|