BHP+35 hp (11%)
Standard
325 hp
Tuned
360 hp
Torque+38 Nm (5%)
Standard
772 Nm
Tuned
810 Nm
Suitability
Moderate (5.5/10)Gains Profile
Limited headroomHeadroom
LowFord F-550 6.0 V8 325hp ECU Remapping
Considering an ECU remap for your Ford F-550 6.0 V8 325hp? A Stage 1 remap can take this All diesel engine from 325 BHP to 360 BHP and from 772 Nm to 810 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford F-550 can achieve.
How this engine compares
- 2ndof 5 Ford F-550 engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 20%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford F-550 6.0 V8 325hp is a 6.0L turbocharged diesel engine producing 325 BHP and 772 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 360 BHP and 810 Nm — a gain of around 35 BHP (11%) and 38 Nm (5%).
This engine has moderate remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other F-550 All Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|