BHP+20 hp (8%)
Standard
260 hp
Tuned
280 hp
Torque+20 Nm (4%)
Standard
475 Nm
Tuned
495 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowFord F-350 5.4 V8 260hp ECU Remapping
Considering an ECU remap for your Ford F-350 5.4 V8 260hp? A Stage 1 remap can take this All petrol engine from 260 BHP to 280 BHP and from 475 Nm to 495 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford F-350 can achieve.
How this engine compares
- 5thof 6 Ford F-350 engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford F-350 5.4 V8 260hp is a 5.4L naturally aspirated petrol engine producing 260 BHP and 475 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 280 BHP and 495 Nm — a gain of around 20 BHP (8%) and 20 Nm (4%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other F-350 All Engines
| Engine |
|---|