BHP+30 hp (7%)
Standard
440 hp
Tuned
470 hp
Torque+34 Nm (3%)
Standard
1166 Nm
Tuned
1200 Nm
Suitability
Moderate (5/10)Gains Profile
Limited headroomHeadroom
LowFord F-250 6.7 V8 440hp ECU Remapping
Considering an ECU remap for your Ford F-250 6.7 V8 440hp? A Stage 1 remap can take this -> 2020 diesel engine from 440 BHP to 470 BHP and from 1166 Nm to 1200 Nm of torque (turbocharged). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford F-250 can achieve.
How this engine compares
- 3rdof 6 Ford F-250 engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 19%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford F-250 6.7 V8 440hp is a 6.7L turbocharged diesel engine producing 440 BHP and 1166 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 470 BHP and 1200 Nm — a gain of around 30 BHP (7%) and 34 Nm (3%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other F-250 -> 2020 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|