BHP+28 hp (6%)
Standard
457 hp
Tuned
485 hp
Torque+50 Nm (6%)
Standard
825 Nm
Tuned
875 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowFord Explorer ST 3.0 V6 457hp ECU Remapping
Considering an ECU remap for your Ford Explorer ST 3.0 V6 457hp? A Stage 1 remap can take this 2019 -> petrol engine from 457 BHP to 485 BHP and from 825 Nm to 875 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Explorer can achieve.
How this engine compares
- 3rdof 7 Ford Explorer engines by power gain
- 37%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Explorer ST 3.0 V6 457hp is a 3.0L naturally aspirated petrol engine producing 457 BHP and 825 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 485 BHP and 875 Nm — a gain of around 28 BHP (6%) and 50 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other Explorer 2019 -> Engines
| Engine |
|---|