BHP+50 hp (15%)
Standard
325 hp
Tuned
375 hp
Torque+61 Nm (8%)
Standard
759 Nm
Tuned
820 Nm
Suitability
Good (6/10)Gains Profile
Power-focusedHeadroom
MediumFord Excursion 6.0 V8 325hp ECU Remapping
Considering an ECU remap for your Ford Excursion 6.0 V8 325hp? A Stage 1 remap can take this 1999 - 2005 diesel engine from 325 BHP to 375 BHP and from 759 Nm to 820 Nm of torque (turbocharged). This engine scores 6/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Excursion can achieve.
How this engine compares
- 76%of the 9,842 engines we hold gain data for see a smaller power increase
- 52%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Excursion 6.0 V8 325hp is a 6.0L turbocharged diesel engine producing 325 BHP and 759 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 375 BHP and 820 Nm — a gain of around 50 BHP (15%) and 61 Nm (8%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Technical Specifications
- Fuel Type
- Diesel