Ford Everest 2.0 Ecoblue 180hp Remap
Expected gains of +10 BHP and +30 Nm torque
Get Your Free Quote ↓BHP+10 hp (6%)
Standard
180 hp
Tuned
190 hp
Torque+30 Nm (7%)
Standard
420 Nm
Tuned
450 Nm
Suitability
Moderate (5.5/10)Gains Profile
Limited headroomHeadroom
LowFord Everest 2.0 Ecoblue 180hp ECU Remapping
Considering an ECU remap for your Ford Everest 2.0 Ecoblue 180hp? A Stage 1 remap can take this 2015 - 2018 diesel engine from 180 BHP to 190 BHP and from 420 Nm to 450 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Everest can achieve.
How this engine compares
- 6thof 6 Ford Everest engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Everest 2.0 Ecoblue 180hp is a 2.0L turbocharged diesel engine producing 180 BHP and 420 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 450 Nm — a gain of around 10 BHP (6%) and 30 Nm (7%).
This engine has moderate remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Everest 2015 - 2018 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|