BHP+19 hp (13%)
Standard
145 hp
Tuned
164 hp
Torque+32 Nm (16%)
Standard
200 Nm
Tuned
232 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumFord Escape 2.3i 145hp ECU Remapping
Considering an ECU remap for your Ford Escape 2.3i 145hp? A Stage 1 remap can take this 2007 - 2012 petrol engine from 145 BHP to 164 BHP and from 200 Nm to 232 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Escape can achieve.
How this engine compares
- 5thof 8 Ford Escape engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 19%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Escape 2.3i 145hp is a 1.6L naturally aspirated petrol engine producing 145 BHP and 200 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 164 BHP and 232 Nm — a gain of around 19 BHP (13%) and 32 Nm (16%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Escape 2007 - 2012 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|