BHP+30 hp (11%)
Standard
285 hp
Tuned
315 hp
Torque+22 Nm (6%)
Standard
343 Nm
Tuned
365 Nm
Suitability
Moderate (4/10)Gains Profile
Power-focusedHeadroom
LowFord Edge 3.5 V6 285hp ECU Remapping
Considering an ECU remap for your Ford Edge 3.5 V6 285hp? A Stage 1 remap can take this 2007 - 2015 petrol engine from 285 BHP to 315 BHP and from 343 Nm to 365 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Edge can achieve.
How this engine compares
- 3rdof 11 Ford Edge engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 12%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Edge 3.5 V6 285hp is a 3.5L naturally aspirated petrol engine producing 285 BHP and 343 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 315 BHP and 365 Nm — a gain of around 30 BHP (11%) and 22 Nm (6%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Edge 2007 - 2015 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|