BHP+20 hp (8%)
Standard
255 hp
Tuned
275 hp
Torque+27 Nm (6%)
Standard
438 Nm
Tuned
465 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowFord E-Series 5.4 V8 255hp ECU Remapping
Considering an ECU remap for your Ford E-Series 5.4 V8 255hp? A Stage 1 remap can take this 2006 - 2014 petrol engine from 255 BHP to 275 BHP and from 438 Nm to 465 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford E-Series can achieve.
How this engine compares
- 1stof 2 Ford E-Series engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 16%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford E-Series 5.4 V8 255hp is a 5.4L naturally aspirated petrol engine producing 255 BHP and 438 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 275 BHP and 465 Nm — a gain of around 20 BHP (8%) and 27 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other E-Series 2006 - 2014 Engines
| Engine |
|---|