BHP+10 hp (10%)
Standard
105 hp
Tuned
115 hp
Torque+15 Nm (10%)
Standard
150 Nm
Tuned
165 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowFord C-Max 1.6 TI-VCT 105hp ECU Remapping
Considering an ECU remap for your Ford C-Max 1.6 TI-VCT 105hp? A Stage 1 remap can take this 2011 - 2015 petrol engine from 105 BHP to 115 BHP and from 150 Nm to 165 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford C-Max can achieve.
How this engine compares
- 26thof 27 Ford C-Max engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 3%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford C-Max 1.6 TI-VCT 105hp is a 1.6L naturally aspirated petrol engine producing 105 BHP and 150 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 115 BHP and 165 Nm — a gain of around 10 BHP (10%) and 15 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other C-Max 2011 - 2015 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|