BHP+30 hp (20%)
Standard
150 hp
Tuned
180 hp
Torque+53 Nm (14%)
Standard
367 Nm
Tuned
420 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumFiat Sedici 2.0 Mjet 150hp ECU Remapping
Considering an ECU remap for your Fiat Sedici 2.0 Mjet 150hp? A Stage 1 remap can take this All diesel engine from 150 BHP to 180 BHP and from 367 Nm to 420 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Sedici can achieve.
How this engine compares
- 2ndof 3 Fiat Sedici engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 38%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat Sedici 2.0 Mjet 150hp is a 2.0L turbocharged diesel engine producing 150 BHP and 367 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 420 Nm — a gain of around 30 BHP (20%) and 53 Nm (14%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Sedici All Engines
| Engine | BHP | Gain | Torque |
|---|