BHP+20 hp (25%)
Standard
80 hp
Tuned
100 hp
Torque+50 Nm (25%)
Standard
200 Nm
Tuned
250 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighFiat Qubo 1.3 Mjet 80hp ECU Remapping
Considering an ECU remap for your Fiat Qubo 1.3 Mjet 80hp? A Stage 1 remap can take this 2008 -> diesel engine from 80 BHP to 100 BHP and from 200 Nm to 250 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Qubo can achieve.
How this engine compares
- 1stof 3 Fiat Qubo engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat Qubo 1.3 Mjet 80hp is a 1.3L turbocharged diesel engine producing 80 BHP and 200 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 100 BHP and 250 Nm — a gain of around 20 BHP (25%) and 50 Nm (25%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Other Qubo 2008 -> Engines
| Engine | BHP | Gain |
|---|