BHP+35 hp (29%)
Standard
120 hp
Tuned
155 hp
Torque+60 Nm (19%)
Standard
320 Nm
Tuned
380 Nm
Suitability
Excellent (8/10)Gains Profile
Power-focusedHeadroom
HighFiat Punto 1.6 Mjet 120hp ECU Remapping
Considering an ECU remap for your Fiat Punto 1.6 Mjet 120hp? A Stage 1 remap can take this 2012 -> diesel engine from 120 BHP to 155 BHP and from 320 Nm to 380 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Punto can achieve.
How this engine compares
- 2ndof 17 Fiat Punto engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat Punto 1.6 Mjet 120hp is a 1.6L turbocharged diesel engine producing 120 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 155 BHP and 380 Nm — a gain of around 35 BHP (29%) and 60 Nm (19%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Punto 2012 -> Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.4 8v 77hp | 77 → 85 | +8 |