BHP+20 hp (29%)
Standard
70 hp
Tuned
90 hp
Torque+50 Nm (28%)
Standard
180 Nm
Tuned
230 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighFiat Idea 1.3 JTD 70hp ECU Remapping
Considering an ECU remap for your Fiat Idea 1.3 JTD 70hp? A Stage 1 remap can take this All diesel engine from 70 BHP to 90 BHP and from 180 Nm to 230 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Idea can achieve.
How this engine compares
- 3rdof 5 Fiat Idea engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat Idea 1.3 JTD 70hp is a 1.3L turbocharged diesel engine producing 70 BHP and 180 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 90 BHP and 230 Nm — a gain of around 20 BHP (29%) and 50 Nm (28%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Idea All Engines
| Engine | BHP | Gain |
|---|