BHP+25 hp (14%)
Standard
180 hp
Tuned
205 hp
Torque+70 Nm (16%)
Standard
430 Nm
Tuned
500 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumFiat Fullback 2.4D 180hp ECU Remapping
Considering an ECU remap for your Fiat Fullback 2.4D 180hp? A Stage 1 remap can take this 2017 -> diesel engine from 180 BHP to 205 BHP and from 430 Nm to 500 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Fullback can achieve.
How this engine compares
- 2ndof 2 Fiat Fullback engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat Fullback 2.4D 180hp is a 2.4L turbocharged diesel engine producing 180 BHP and 430 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 205 BHP and 500 Nm — a gain of around 25 BHP (14%) and 70 Nm (16%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Fullback 2017 -> Engines
| Engine | BHP | Gain | Torque |
|---|