Fiat Ducato 2.3 120 Multijet 120hp Remap
Expected gains of +30 BHP and +60 Nm torque
Get Your Free Quote ↓BHP+30 hp (25%)
Standard
120 hp
Tuned
150 hp
Torque+60 Nm (19%)
Standard
320 Nm
Tuned
380 Nm
Suitability
Excellent (8/10)Gains Profile
Power-focusedHeadroom
HighFiat Ducato 2.3 120 Multijet 120hp ECU Remapping
Considering an ECU remap for your Fiat Ducato 2.3 120 Multijet 120hp? A Stage 1 remap can take this 2011 - 2016 diesel engine from 120 BHP to 150 BHP and from 320 Nm to 380 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Ducato can achieve.
How this engine compares
- 12thof 23 Fiat Ducato engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat Ducato 2.3 120 Multijet 120hp is a 2.3L turbocharged diesel engine producing 120 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 150 BHP and 380 Nm — a gain of around 30 BHP (25%) and 60 Nm (19%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Ducato 2011 - 2016 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 115 Multijet 115hp | 115 → 150 |