BHP+40 hp (44%)
Standard
90 hp
Tuned
130 hp
Torque+80 Nm (29%)
Standard
280 Nm
Tuned
360 Nm
Suitability
Excellent (8.5/10)Gains Profile
Power-focusedHeadroom
HighFiat Doblo 1.6 M-JTD 90hp ECU Remapping
Considering an ECU remap for your Fiat Doblo 1.6 M-JTD 90hp? A Stage 1 remap can take this 2010 - 2015 diesel engine from 90 BHP to 130 BHP and from 280 Nm to 360 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Doblo can achieve.
How this engine compares
- 1stof 23 Fiat Doblo engines by power gain
- 63%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat Doblo 1.6 M-JTD 90hp is a 1.6L turbocharged diesel engine producing 90 BHP and 280 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 130 BHP and 360 Nm — a gain of around 40 BHP (44%) and 80 Nm (29%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Doblo 2010 - 2015 Engines
| Engine | BHP | Gain |
|---|