BHP+25 hp (24%)
Standard
105 hp
Tuned
130 hp
Torque+70 Nm (24%)
Standard
290 Nm
Tuned
360 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighFiat Bravo 1.6 M-JTD 105hp ECU Remapping
Considering an ECU remap for your Fiat Bravo 1.6 M-JTD 105hp? A Stage 1 remap can take this 2007 - 2015 diesel engine from 105 BHP to 130 BHP and from 290 Nm to 360 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Bravo can achieve.
How this engine compares
- 11thof 14 Fiat Bravo engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat Bravo 1.6 M-JTD 105hp is a 1.6L turbocharged diesel engine producing 105 BHP and 290 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 130 BHP and 360 Nm — a gain of around 25 BHP (24%) and 70 Nm (24%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Other Bravo 2007 - 2015 Engines
| Engine | BHP | Gain |
|---|