Fiat 124 Spider 1.4 MultiAir Turbo 140hp Remap
Expected gains of +45 BHP and +30 Nm torque
Get Your Free Quote ↓BHP+45 hp (32%)
Standard
140 hp
Tuned
185 hp
Torque+30 Nm (13%)
Standard
240 Nm
Tuned
270 Nm
Suitability
Good (7.5/10)Gains Profile
Power-focusedHeadroom
HighFiat 124 Spider 1.4 MultiAir Turbo 140hp ECU Remapping
Considering an ECU remap for your Fiat 124 Spider 1.4 MultiAir Turbo 140hp? A Stage 1 remap can take this 2016 -> petrol engine from 140 BHP to 185 BHP and from 240 Nm to 270 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat 124 Spider can achieve.
How this engine compares
- 1stof 2 Fiat 124 Spider engines by power gain
- 71%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat 124 Spider 1.4 MultiAir Turbo 140hp is a 1.4L turbocharged petrol engine producing 140 BHP and 240 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 185 BHP and 270 Nm — a gain of around 45 BHP (32%) and 30 Nm (12%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other 124 Spider 2016 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|