BHP+20 hp (10%)
Standard
210 hp
Tuned
230 hp
Torque+75 Nm (26%)
Standard
285 Nm
Tuned
360 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumDS 4 1.6 THP 210hp ECU Remapping
Considering an ECU remap for your DS 4 1.6 THP 210hp? A Stage 1 remap can take this 2015 - 2020 petrol engine from 210 BHP to 230 BHP and from 285 Nm to 360 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your DS 4 can achieve.
How this engine compares
- 8thof 9 DS 4 engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 63%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The DS 4 1.6 THP 210hp is a 1.6L turbocharged petrol engine producing 210 BHP and 285 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 230 BHP and 360 Nm — a gain of around 20 BHP (10%) and 75 Nm (26%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.