BHP+20 hp (6%)
Standard
360 hp
Tuned
380 hp
Torque+20 Nm (4%)
Standard
530 Nm
Tuned
550 Nm
Suitability
Limited (3/10)Gains Profile
Limited headroomHeadroom
LowDodge Durango 5.7 V8 360hp ECU Remapping
Considering an ECU remap for your Dodge Durango 5.7 V8 360hp? A Stage 1 remap can take this 2010 -> petrol engine from 360 BHP to 380 BHP and from 530 Nm to 550 Nm of torque (naturally aspirated). This engine scores 3/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dodge Durango can achieve.
How this engine compares
- 1stof 3 Dodge Durango engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Dodge Durango 5.7 V8 360hp is a 5.7L naturally aspirated petrol engine producing 360 BHP and 530 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 380 BHP and 550 Nm — a gain of around 20 BHP (6%) and 20 Nm (4%).
This engine has low remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other Durango 2010 -> Engines
| Engine |
|---|