Dodge Charger SXT 3.6 V6 292hp Remap
Expected gains of +16 BHP and +15 Nm torque
Get Your Free Quote ↓BHP+16 hp (5%)
Standard
292 hp
Tuned
308 hp
Torque+15 Nm (4%)
Standard
353 Nm
Tuned
368 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowDodge Charger SXT 3.6 V6 292hp ECU Remapping
Considering an ECU remap for your Dodge Charger SXT 3.6 V6 292hp? A Stage 1 remap can take this 2019 -> petrol engine from 292 BHP to 308 BHP and from 353 Nm to 368 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dodge Charger can achieve.
How this engine compares
- 13thof 14 Dodge Charger engines by power gain
- 12%of the 9,842 engines we hold gain data for see a smaller power increase
- 3%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Dodge Charger SXT 3.6 V6 292hp is a 3.6L naturally aspirated petrol engine producing 292 BHP and 353 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 308 BHP and 368 Nm — a gain of around 16 BHP (5%) and 15 Nm (4%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Charger 2019 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|