BHP+20 hp (11%)
Standard
190 hp
Tuned
210 hp
Torque+22 Nm (9%)
Standard
258 Nm
Tuned
280 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowDodge Charger 2.7 V6 190hp ECU Remapping
Considering an ECU remap for your Dodge Charger 2.7 V6 190hp? A Stage 1 remap can take this 2006 - 2010 petrol engine from 190 BHP to 210 BHP and from 258 Nm to 280 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dodge Charger can achieve.
How this engine compares
- 5thof 14 Dodge Charger engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 12%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Dodge Charger 2.7 V6 190hp is a 2.7L naturally aspirated petrol engine producing 190 BHP and 258 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 210 BHP and 280 Nm — a gain of around 20 BHP (11%) and 22 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Charger 2006 - 2010 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|