BHP+35 hp (12%)
Standard
295 hp
Tuned
330 hp
Torque+57 Nm (16%)
Standard
363 Nm
Tuned
420 Nm
Suitability
Good (6/10)Gains Profile
Torque-focusedHeadroom
MediumDodge Caliber 2.4T 295hp ECU Remapping
Considering an ECU remap for your Dodge Caliber 2.4T 295hp? A Stage 1 remap can take this 2006 - 2011 petrol engine from 295 BHP to 330 BHP and from 363 Nm to 420 Nm of torque (turbocharged). This engine scores 6/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dodge Caliber can achieve.
How this engine compares
- 2ndof 6 Dodge Caliber engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 40%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Dodge Caliber 2.4T 295hp is a 2.4L turbocharged petrol engine producing 295 BHP and 363 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 330 BHP and 420 Nm — a gain of around 35 BHP (12%) and 57 Nm (16%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!High tuned torque: check transmission torque capacity and service history.