BHP+12 hp (16%)
Standard
73 hp
Tuned
85 hp
Torque+13 Nm (13%)
Standard
97 Nm
Tuned
110 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumDacia Sandero 1.0 SCe 73hp ECU Remapping
Considering an ECU remap for your Dacia Sandero 1.0 SCe 73hp? A Stage 1 remap can take this 2016 - 2020 petrol engine from 73 BHP to 85 BHP and from 97 Nm to 110 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dacia Sandero can achieve.
How this engine compares
- 14thof 19 Dacia Sandero engines by power gain
- 7%of the 9,842 engines we hold gain data for see a smaller power increase
- 2%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Dacia Sandero 1.0 SCe 73hp is a 1.0L naturally aspirated petrol engine producing 73 BHP and 97 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 85 BHP and 110 Nm — a gain of around 12 BHP (16%) and 13 Nm (13%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.