BHP+15 hp (14%)
Standard
110 hp
Tuned
125 hp
Torque+80 Nm (50%)
Standard
160 Nm
Tuned
240 Nm
Suitability
Excellent (8/10)Gains Profile
Torque-focusedHeadroom
HighDacia Jogger 1.0 TCe 110hp ECU Remapping
Considering an ECU remap for your Dacia Jogger 1.0 TCe 110hp? A Stage 1 remap can take this 2022 -> ... petrol engine from 110 BHP to 125 BHP and from 160 Nm to 240 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dacia Jogger can achieve.
How this engine compares
- 1stof 2 Dacia Jogger engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Dacia Jogger 1.0 TCe 110hp is a 1.0L turbocharged petrol engine producing 110 BHP and 160 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 125 BHP and 240 Nm — a gain of around 15 BHP (14%) and 80 Nm (50%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.