BHP+15 hp (15%)
Standard
100 hp
Tuned
115 hp
Torque+40 Nm (25%)
Standard
160 Nm
Tuned
200 Nm
Suitability
Good (7.5/10)Gains Profile
Torque-focusedHeadroom
HighDacia Duster 1.0 TCe 100hp ECU Remapping
Considering an ECU remap for your Dacia Duster 1.0 TCe 100hp? A Stage 1 remap can take this 2018 - 2020 petrol engine from 100 BHP to 115 BHP and from 160 Nm to 200 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dacia Duster can achieve.
How this engine compares
- 14thof 19 Dacia Duster engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Dacia Duster 1.0 TCe 100hp is a 1.0L turbocharged petrol engine producing 100 BHP and 160 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 115 BHP and 200 Nm — a gain of around 15 BHP (15%) and 40 Nm (25%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other Duster 2018 - 2020 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|