BHP+50 hp (33%)
Standard
150 hp
Tuned
200 hp
Torque+70 Nm (19%)
Standard
360 Nm
Tuned
430 Nm
Suitability
Good (7.5/10)Gains Profile
Power-focusedHeadroom
HighCupra Formentor 2.0 TDI 150hp ECU Remapping
Considering an ECU remap for your Cupra Formentor 2.0 TDI 150hp? A Stage 1 remap can take this 2020 - 2024 diesel engine from 150 BHP to 200 BHP and from 360 Nm to 430 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Cupra Formentor can achieve.
How this engine compares
- 4thof 6 Cupra Formentor engines by power gain
- 76%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Cupra Formentor 2.0 TDI 150hp is a 2.0L turbocharged diesel engine producing 150 BHP and 360 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 430 Nm — a gain of around 50 BHP (33%) and 70 Nm (19%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Formentor 2020 - 2024 Engines
| Engine | BHP | Gain | Torque |
|---|