BHP+50 hp (17%)
Standard
300 hp
Tuned
350 hp
Torque+80 Nm (21%)
Standard
380 Nm
Tuned
460 Nm
Suitability
Good (6.5/10)Gains Profile
BalancedHeadroom
MediumCupra Ateca 2.0 TSI 300hp ECU Remapping
Considering an ECU remap for your Cupra Ateca 2.0 TSI 300hp? A Stage 1 remap can take this 2018 - 2019 petrol engine from 300 BHP to 350 BHP and from 380 Nm to 460 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Cupra Ateca can achieve.
How this engine compares
- 1stof 2 Cupra Ateca engines by power gain
- 76%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Cupra Ateca 2.0 TSI 300hp is a 2.0L turbocharged petrol engine producing 300 BHP and 380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 350 BHP and 460 Nm — a gain of around 50 BHP (17%) and 80 Nm (21%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!High tuned torque: check transmission torque capacity and service history.
Technical Specifications
- Fuel Type