BHP+30 hp (25%)
Standard
120 hp
Tuned
150 hp
Torque+80 Nm (27%)
Standard
300 Nm
Tuned
380 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighCitroën Jumpy 2.0 HDi 120hp ECU Remapping
Considering an ECU remap for your Citroën Jumpy 2.0 HDi 120hp? A Stage 1 remap can take this -> 2016 diesel engine from 120 BHP to 150 BHP and from 300 Nm to 380 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Citroën Jumpy can achieve.
How this engine compares
- 11thof 20 Citroën Jumpy engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Citroën Jumpy 2.0 HDi 120hp is a 2.0L turbocharged diesel engine producing 120 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 150 BHP and 380 Nm — a gain of around 30 BHP (25%) and 80 Nm (27%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Jumpy -> 2016 Engines
| Engine | BHP | Gain |
|---|