BHP+30 hp (17%)
Standard
180 hp
Tuned
210 hp
Torque+40 Nm (10%)
Standard
400 Nm
Tuned
440 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumCitroën DS4 2.0 BlueHDI 180hp ECU Remapping
Considering an ECU remap for your Citroën DS4 2.0 BlueHDI 180hp? A Stage 1 remap can take this 2011 - 2015 diesel engine from 180 BHP to 210 BHP and from 400 Nm to 440 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Citroën DS4 can achieve.
How this engine compares
- 5thof 16 Citroën DS4 engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Citroën DS4 2.0 BlueHDI 180hp is a 2.0L turbocharged diesel engine producing 180 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 210 BHP and 440 Nm — a gain of around 30 BHP (17%) and 40 Nm (10%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other DS4 2011 - 2015 Engines
| Engine | BHP | Gain | Torque |
|---|