BHP+10 hp (12%)
Standard
82 hp
Tuned
92 hp
Torque+10 Nm (8%)
Standard
118 Nm
Tuned
128 Nm
Suitability
Moderate (4.5/10)Gains Profile
Power-focusedHeadroom
MediumCitroën DS3 1.2 PureTech 82hp ECU Remapping
Considering an ECU remap for your Citroën DS3 1.2 PureTech 82hp? A Stage 1 remap can take this 2014 - 2015 petrol engine from 82 BHP to 92 BHP and from 118 Nm to 128 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Citroën DS3 can achieve.
How this engine compares
- 20thof 22 Citroën DS3 engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 0%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Citroën DS3 1.2 PureTech 82hp is a 1.2L naturally aspirated petrol engine producing 82 BHP and 118 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 92 BHP and 128 Nm — a gain of around 10 BHP (12%) and 10 Nm (8%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other DS3 2014 - 2015 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|