BHP+40 hp (20%)
Standard
200 hp
Tuned
240 hp
Torque+85 Nm (31%)
Standard
275 Nm
Tuned
360 Nm
Suitability
Good (7.5/10)Gains Profile
Torque-focusedHeadroom
HighCitroën DS3 1.6 THP 200hp ECU Remapping
Considering an ECU remap for your Citroën DS3 1.6 THP 200hp? A Stage 1 remap can take this 2010 - 2014 petrol engine from 200 BHP to 240 BHP and from 275 Nm to 360 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Citroën DS3 can achieve.
How this engine compares
- 1stof 22 Citroën DS3 engines by power gain
- 63%of the 9,842 engines we hold gain data for see a smaller power increase
- 73%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Citroën DS3 1.6 THP 200hp is a 1.6L turbocharged petrol engine producing 200 BHP and 275 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 240 BHP and 360 Nm — a gain of around 40 BHP (20%) and 85 Nm (31%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.