BHP+9 hp (11%)
Standard
83 hp
Tuned
92 hp
Torque+12 Nm (10%)
Standard
118 Nm
Tuned
130 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumCitroën C3 1.2 PureTech 83hp ECU Remapping
Considering an ECU remap for your Citroën C3 1.2 PureTech 83hp? A Stage 1 remap can take this 2020 -> petrol engine from 83 BHP to 92 BHP and from 118 Nm to 130 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Citroën C3 can achieve.
How this engine compares
- 29thof 33 Citroën C3 engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 1%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Citroën C3 1.2 PureTech 83hp is a 1.2L naturally aspirated petrol engine producing 83 BHP and 118 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 92 BHP and 130 Nm — a gain of around 9 BHP (11%) and 12 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other C3 2020 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|