BHP+10 hp (9%)
Standard
110 hp
Tuned
120 hp
Torque+18 Nm (12%)
Standard
147 Nm
Tuned
165 Nm
Suitability
Moderate (4.5/10)Gains Profile
Torque-focusedHeadroom
MediumCitroën C2 1.6i 16v 110hp ECU Remapping
Considering an ECU remap for your Citroën C2 1.6i 16v 110hp? A Stage 1 remap can take this 2003 - 2010 petrol engine from 110 BHP to 120 BHP and from 147 Nm to 165 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Citroën C2 can achieve.
How this engine compares
- 4thof 5 Citroën C2 engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 7%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Citroën C2 1.6i 16v 110hp is a 1.4L naturally aspirated petrol engine producing 110 BHP and 147 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 120 BHP and 165 Nm — a gain of around 10 BHP (9%) and 18 Nm (12%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other C2 2003 - 2010 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|